Investigations of precipitates in heat treated AgPd30/CuSn6 layers

The subject of the investigations are precipitation zones, which grew as a result of chemical diffusion in AgPd30/CuSn6 bimetals. These precipitation zones have been characterized by metallography, electron probe microanalysis and x-ray diffraction. The growth of precipitation zones in the plating layer and in the substrate layer in dependence on time have been determined. The use of x-ray diffraction alone for the identification of the precipitates could not supply satisfying results in every case. This problem was solved by the application of electron probe microanalysis using a correction method, which allows the estimation of the chemical composition of small particles.Dedicated to Professor Dr. rer. nat. Dr. h. c. Hubertus Nickel on the occasion of his 65th birthday     

Pt/Au双金属纳米粒子的制备及表征

Poly (N-vinyl-2-pyrrolidone)-protected Pt/Au bimetallic nanoparticles were obtained by reducing the mixture of HAuCl4 and H2PtCl6 with sodium borohydride. UV-vis spectra, transmission electronic microscopy and X-my diffraction reveal that the prepared bimetallic nanoparticles are of alloy structure.     

纳米核壳式铜-锡双金属粉的制备及性能研究

A kind of novel core-shell Cu-Sn bimetallic nanoparticles has been prepared by a new method (displacement method), in which Sn was made to cover on the surface of Cu nano-core. The preparation method and reaction mechanism have been discussed. This reaction happened under the existence of coordinate agent-(NH₂)₂CS and protective agent PVP. The nanoparticles prepared were with a core-shell structure, granule diameter between 50～100 nm and good dispersing capability. The Cu-Sn nanoparticles proposed has better oxidation-resistant ability than Cu nanoparticles with corresponding granule diameter and can be applied as lubricant additives as well as antibacterial agent. When the additive amount is very low (0.1wt‰～0.5wt‰), it can improve the P_B of the lubricant by 92%～106%, and also enhance its antiwear characteristics and friction-reducing properties. At the concentration of 1 000 ppm, it can reach an antibacterial ratio of 99.99%.     

双金属纳米材料与催化

双金属纳米材料作为工业上少见的一类催化剂材料,在合成过程中可通过对其组成、结构晶粒大小尺寸的调控,实现其催化性能的合理调控,因此,近年来备受催化材料化学领域科技工作者的广泛关注.随着纳米材料调控合成方面的技术进步,具有均一小尺寸可控结构的纳米材料对于制备高效催化剂材料和研究催化反应机理具有重要的意义.结合纳米技术探索开发设计新型的双金属纳米催化剂材料颇具挑战性.本文围绕双金属纳米催化剂的合成、结构及其相关催化性能,从不同的双金属纳米催化剂出发,对催化剂的性能提高、催化机理研究的若干问题和分析手段及方法在催化研究中的进展发表一点初浅认识.     

MnWO4/生物质衍生碳纳米复合催化剂的制备及催化性能

通过共沉淀法合成了双金属氧化物MnWO₄镶嵌生物质衍生碳（MnWO₄/BC）纳米复合催化剂,并将其作为对电极（counter electrode,CE）催化剂组装了染料敏化太阳能电池（dye-sensitized solar cell,DSSC）,探究了MnWO₄/BC在非碘体系中的催化性能和光伏性能。结果表明：在铜氧化还原（Cu²⁺/Cu⁺）电对DSSC中获得的光电能量转换效率（power conversion efficiency,PCE）为3.57%（D35）和1.59%（Y123）,高于Pt电极的PCE（3.12%,1.16%）;50次连续循环伏安测试表明,MnWO₄/BC催化剂具有较好的电化学稳定性。     

Nitrite Oxidation with Copper–Cobalt Nanoparticles on Carbon Nanotubes Doped Conducting Polymer PEDOT Composite

Copper–cobalt bimetal nanoparticles (Cu?Co) have been electrochemically prepared on glassy carbon electrodes (GCEs), which were electrodeposited with conducting polymer nanocomposites of poly(3,4‐ethylenedioxythiophene) (PEDOT) doped with carbon nanotubes (CNTs). Owing to their good conductivity, high mechanical strength, and large surface area, the PEDOT/CNTs composites offered excellent substrates for the electrochemical deposition of Cu?Co nanoparticles. As a result of their nanostructure and the synergic effect between Cu and Co, the Cu?Co/PEDOT/CNTs composites exhibited significantly enhanced catalytic activity towards the electrochemical oxidation of nitrite. Under optimized conditions, the nanocomposite‐modified electrodes had a fast response time within 2 s and a linear range from 0.5 to 430 μm for the detection of nitrite, with a detection limit of 60 nm . Moreover, the Cu?Co/PEDOT/CNTs composites were highly stable, and the prepared nitrite sensors could retain more than 96 % of their initial response after 30 days.     

双金属爆炸焊接上限

本文根据热传导理论给出了爆炸焊接时双金属结合区附近的温度场解析解。并利用该解初步研究了双金属的爆炸焊接上限。     

硼、磷共掺杂铁钴双金属材料的制备及其电催化析氧性能

采用一步水热法合成了硼、磷共掺杂铁钴材料(Fe-Co-B-P)。借助扫描电子显微镜(SEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)、傅里叶变换红外光谱(FT-IR)等技术对所合成材料的形貌、结构和组成进行表征。利用线性扫描伏安(LSV)、循环伏安(CV)、电化学阻抗谱(EIS)等技术研究材料电化学析氧反应(OER)性能。结果表明,Fe-Co-B-P表面疏松且粗糙,颗粒间有许多空隙。在电流密度为10和100 mA·cm^-2时,其过电势分别为278和309 mV,Tafel斜率为24 mV·dec^-1,说明该材料具有较优的电催化析氧性能。其在连续进行10 h的计时电位测试过程中,电势基本保持在1.55 V(vs RHE),表明该催化剂具有较好的电化学稳定性。这是由于铁钴双金属与硼、磷非金属之间的协同作用促进了电子的传递。     

AgNi双金属改性多面体钒酸铋的制备及光催化性能

采用简单的水热法制备了多面体钒酸铋（BVO）材料,又通过化学还原法首次在BVO上原位合成了一种小尺寸的AgNi双金属助催化剂并研究了其光催化性能。采用X射线衍射（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、紫外可见漫反射光谱（UV-Vis DRS）、X射线光电子能谱（XPS）、光致发光（PL）光谱、N₂吸附-脱附等手段对制备的AgNi/BVO材料的理化性能进行了表征。结果表明,AgNi双金属广泛负载在这种特殊形貌的BVO多面体表面,大大增加了金属的附着位点,同时AgNi负载也提高了BVO的结晶性。银表面等离子体谐振效应与镍的共格界面效应增强了BVO催化剂对可见光的吸收,增强了光生电子的分离,提高了光催化活性。光催化降解MB （亚甲基蓝）实验表明,当Ag、Ni的质量比为3∶1时,AgNi/BVO的催化活性最高,在可见光照射下其反应速率常数是BVO的5.4倍,该光催化剂在4次循环后仍能保持良好的光催化活性。